Product Catalog

CK-4 diesel engine oil

Print
Facebook
Email

Maxtop CK-4 diesel engine oil is made of highly refined second class, third class, fourth class and fifth class base oil, and is refined by adding high-efficiency and multi-functional compound additives. Strengthen anti-wear protection: zinc, molybdenum and other anti-wear additives are used to reduce the wear of cylinder liner, piston ring and turbocharger, and extend the engine overhaul mileage. Fuel economy optimization: The low friction formula reduces mechanical resistance and reduces overall fuel consumption by 2%-4%, helping the fleet reduce operating costs. CK-4 diesel engine oil of various viscosity levels can be produced according to customer requirements.

Performance Test Results

Project

Quality indicator

Quality indicator

Quality indicator

Model

5W30

10W40

15W40

Kinematic viscosity ( 100 ℃), mm2 / s

9.3~<12.5

12.5~<16.3

12.5~<16.3

Low temperature dynamic viscosity/(mPa.s) not more than

6600(-30)

7000(-25)

7000(-20)

High temperature and high shear viscosity (150℃, 10 6 s -1 )/(mPa.s) not less than

3.5

3.5

3.5

  • Low temperature pumping temperature/(mPa•S)
  • When there is no yield stress, No more than

60000

(-35)

60000

(-30)

60000

(-25)

Diesel Nozzle Shear Stability Kinematic viscosity at 100℃ after 90 cycles, mm 2 /s

Within this viscosity grade

Within this viscosity grade

Within this viscosity grade

Flash point (open), ℃   No less than

200

205

215

Pour point, ℃ No higher than

-35

-30

-25

Sulfated ash (mass fraction) /% not more than

1.0

1.0

1.0

Alkalinity (in KOH ) /mg/g

8.0

8.0

8.0

Phosphorus content, % (mass fraction) not more than

0.12

0.12

0.12

Sulfur content, % (mass fraction) not more than

0.4

0.4

0.4

Evaporation loss, % (mass fraction) not more than

18

15

15

Foaming properties (foam tendency / foam stability), mL/mL

  • 24 ℃ No more than
  • 93.5 ℃ No more than
  • After 24 ℃ No more than

 

10/0

20/0

10/0

 

10/0

20/0

10/0

 

10/0

20/0

10/0

Water (volume fraction), % No more than

trace

trace

trace

Mechanical impurities (mass fraction), % No more than

0.01

0.01

0.01

List Price