Performance Test Results
Model | No. 1 | No.2 | No. 3 |
Working cone penetration/0.1mm | 296~325 | 265~295 | 235~264 |
Dropping point/℃ | ≥165 | ≥170 | ≥175 |
Steel mesh oil separation (100℃, 24h) (mass fraction) /% | ≤8.0 | ≤5.0 | ≤3.0 |
Water content (mass fraction)/% | trace | trace | trace |
Corrosion (45# steel sheet, 100℃. 24h) | qualified | qualified | qualified |
Evaporation loss (99℃, 22h) (mass fraction)/% | ≤2.0 | ≤2.0 | ≤2.0 |
Low temperature performance (-40℃, 30min) | qualified | qualified | qualified |
Wet heat test (45# steel sheet, 30d) (rust level)/level | ≤B | ≤B | ≤B |
Salt spray test (45# steel sheet, 30d) (rust level)/level | ≤B | ≤B | ≤B |
Oxidation stability (99°C, 100h, 758kPa) Pressure drop after oxidation/kPa Acid value after oxidation/mgKOH/g |
≤70 ≤1.0 |
≤70 ≤1.0 |
≤70 ≤1.0 |
Compatibility (65℃, 40d) Oil absorption rate of sheath material/% Change rate of tensile strength of sheath material/% |
≤10 ≤30 |
≤10 ≤30 |
≤10 ≤30 |
Ash content (mass fraction)/% | ≤10 | ≤10 | ≤10 |
